Organic Stains
For all organic stains use Clean-n-Brite as directed on the container. Clean-n-Brite instantly removes organic stains permanently and eliminates pet odors too.
Difficult Stains
Acid Substances
Strong acids, such as battery acids and some tile cleaning compounds, if spilled on a carpet, require prompt action to prevent serious damage. First, flush the affected area with water. Sponge up the excess and repeat the process several times until the acid has been diluted and washed away. Finally, sponge the area with a solution prepared by adding one (1) tablespoon of baking soda to one (1) quart of warm water. Rinse again. Dry the carpet as quickly and thoroughly as possible.
Blood
To remove blood, use a strong solution of Clean-n-Brite immediately to prevent setting the stain.
Burns
Burn damage can be remedied only by reweaving, retufting, or resectioning the damaged area. However, the appearance of an area of charred carpet can be improved by carefully clipping off blackened ends of tufts using small, sharp scissors. Trim surrounding tufts to minimize indentation.
Camouflage is the best way to deal with a cigarette burn. Remove as many of the burned fibers as you can, either with tweezers or a pair of cuticle scissors. Snip some clean fibers from an out of the way spot and glue them into the hole with white glue or fabric glue. Allow the area to dry thoroughly for 24 hours.
Chewing Gum
Heat gum with an electric hair dryer using caution not to melt the fiber. Allow softened gum to adhere to a plastic sandwich bag and lift from carpet. Apply methyl salicyclate (i.e. Extra Strength Ben Gay) and repeat the process. When gum is fully removed, clean the area with Clean-n-Brite cleaner followed by a warm water rinse. Repeat if necessary.
Chewing gum may also be removed using a solvent based cleaner such as lighter fluid or Goof Off. Rinse carpet well with water and blot dry after solvent application.
Freezing also works great when it comes to getting rid of gum. Hold an ice cube against the gum until it becomes hard and brittle. Then break it apart with a dull knife and lift off. Remove any remains with Clean-n-Brite cleaner.
Dye Stains
Many beverages, medicines, cosmetics, foods, and other liquids contain synthetic dyes. These dyes may be absorbed into the fibers making removal very slow or impossible. Follow dye spot removal procedures on the Clean-n-Brite container.
Sometimes the stain can be hidden by spot dyeing, retufting, or by repairing the affected area.
Fingernail Polish
Use a non-acetate fingernail polish remover. Apply a small amount of the fingernail polish remover to a white cloth, and work in gently - do not rub - working from the edges of the spill to the center to prevent spreading. Allow to remain on the spill a few minutes. Be patient, blotting the area several times. Rinse carpet with water and blot dry. If discoloration remains spot clean area with Clean-n-Brite.
Removing Candle Wax
Remove candle wax drippings by covering area with paper towels and then ironing the spot. The towels will absorb the wax.
This powerful stain remover and degreaser will work cleaning miracles around your home. Watch as stains vanish instantly before your eyes!
Order today and start cleaning, brightening and deodorizing faster and easier than ever before with Clean-n-Brite Power Crystals.
Take 30 days to try our product and if doesn't do everything we promised, simply return it for a full refund on the purchase price.
Order Now & Save!
Questions?
Toll Free: 1-877-519-1689
|
|
|
